Is Your Roof Ready for Texas Heat? Materials That Withstand Extreme Temperatures

In Andrews, TX, the heat doesn’t let up—and neither should your roof.

We’ve seen roofs around here blister, crack, and peel under the kind of heat that bakes metal to the touch and pushes rooftop temps past 150°F. If your roof wasn’t built to handle that kind of exposure, it’s not a matter of if it’ll fail—it's when.

Whether you're a homeowner tired of high cooling bills or a business owner managing a facility in the oilfield, you need a roofing system that holds up to heat, sun, and time.

In this article:

• Why Texas heat wears out most roofs early
• What materials are proven to hold up in West Texas conditions
• What you need to know before investing in an upgrade
• The pros and cons of each system
• How PB Roofing helps protect buildings like yours

If your roof hasn’t been checked in a while, schedule a free inspection with PB Roofing.

Why Heat Is One of the Biggest Threats to Your Roof in Andrews, TX

The damage caused by extreme heat builds slowly—and by the time you see it, it’s already costing you.

Around Andrews, summer brings long stretches of high UV exposure, roof deck expansion and contraction, and a constant cycle of thermal stress. We see:

• Shingles curling or cracking
• Flat roofs pulling at the seams
• Coatings bubbling or chalking
• Metal panels expanding out of spec

And this isn’t just cosmetic. Once a roof system starts breaking down from heat, leaks are next—and insurance claims rarely go smoothly if the damage is blamed on neglect.

That's why heat-resistant roofing and cool roofing materials matter here more than most places.

What to Know Before You Invest in a Heat-Resistant Roofing System

Upgrading your roof to withstand Texas heat isn’t as simple as picking a product off a shelf. There are several factors that need to be looked at first—and if your roofer isn’t walking you through them, you’re taking on risk.

1. Roof Structure and Compatibility

We look at the condition of your decking, slope, ventilation, and insulation. If the bones aren’t solid, the best material in the world won’t help.

2. Project Budget

Costs vary depending on system and structure, but most heat-rated roof systems range from $3–$9 per square foot.

3. Local Requirements

Some commercial properties in Andrews, TX are required to use energy-efficient roofing materials. We take care of permitting and compliance for every job.

4. Downtime Planning

If you’re running a business, we’ll coordinate around your hours to minimize disruption. We work fast and we clean up after ourselves.

What Roofing Materials Actually Handle Texas Heat?

Here’s a breakdown of systems we’ve used on real buildings across West Texas. These aren’t trends—they’re options we stand behind.

TPO and PVC

These white, single-ply membranes are common on commercial flat roofs and perform well under UV.

• Where they work: Offices, warehouses, schools
• Pros: Reflect heat, help cut cooling costs, decent lifespan
• Cons: Installation matters—poor seams = early failure

Silicone Roof Coatings

We’ve used these coatings to extend the life of aging metal and flat roofs by up to 15 years.

• Where they work: Older roofs that are still dry and solid
• Pros: Seamless barrier, high reflectivity, quick install
• Cons: Not for roofs that are already failing structurally

Reflective Metal Roofing

Coated standing-seam metal handles heat better than most systems and holds up in high winds and hail.

• Where they work: Sloped commercial, oilfield, and residential
• Pros: Long-term durability, clean look, minimal maintenance
• Cons: Costs more up front, but outlasts most options

SPF + Reflective Topcoat

Spray foam roofing systems combine insulation and waterproofing in one seamless layer.

• Where they work: Flat commercial or specialty-use roofs
• Pros: Energy-efficient, flexible, easy to repair
• Cons: Must be maintained every few years to stay effective

How PB Roofing Helps Buildings in Andrews Beat the Heat

We’ve been roofing long enough to know that materials are only part of the equation. What matters most is how—and where—they’re installed.

We’ve worked on:

• Grocery stores that need to stay open during installs
• Oilfield service buildings that get pounded by dust and heat
• Commercial flat roofs where ponding water meets 100+ degree days
• Residential jobs where cooling costs are out of control

And we don’t just “install and disappear.” Our clients trust us to inspect, recommend, explain, and stand behind the work.

What you get with PB Roofing:

• Full inspection with photos and a written scope of work
• Clear recommendations—not scare tactics or upsells
• Certified installs using proven products like GAF, Mule-Hide, Tropical Coating, and Uniflex
• A 10-year workmanship warranty
• No required deposit (though it’s preferred)

If you’ve been burned by contractors who don’t show up or do half the job, we get it. Our goal is to do the job right, on time, and without the runaround.

Pros and Cons of Each System

‍

Andrews, TX Roofing FAQs: Choosing the Right System for the Heat

‍

Don’t Let Heat Decide When Your Roof Fails

If you own or manage a building in Andrews, TX, your roof isn’t just protecting what's underneath—it’s taking a beating year-round. And when it’s not built for heat, that beating gets expensive fast.

At PB Roofing, we install durable roof solutions built specifically for West Texas conditions. We don’t cut corners. We don’t disappear after the job. And we don’t recommend systems we wouldn’t install on our own buildings.

If you’re ready to stop patching and start protecting—we’re ready when you are.

Schedule your free inspection today.

‍